Customer Reviews With Photos

I wish I could give it 10 stars. I absolutely love this thing. It's so easy to use and clean it's just great. The way it holds the coffee inside itself is so much better than a glass pot or single serve types... I've had them all and this is by far the best. I've only had it about 2 months so I can't speak to durability but so far it's been great. If you're a daily coffee drinker... Just get one.

I want a programmable 5-cup coffee machine, but the only one that supports programming is this large capacity one. The small capacity one only has a button switch and cannot brew coffee on time. I returned a coffee machine before because the water temperature was not high enough to activate the aroma of the coffee. I recommend this coffee machine. The boiling water temperature and the easy-to-clean top cover do not leave any residue.

Great small compact K cup coffee machine. Low noise level. Easy to use and works great and fast. Reminds me of a hotel coffee maker. Very happy!

I ordered this as I needed a small coffee maker without a glass beaker. Does not disappoint! Feels sturdy, doesn’t get too hot on the outside, presses smoothly with no loose grounds in my cup. Comes with an extra filter and a perfect sized spoon. I use the 8oz setting for hot water on the Keurig and it works nicely. Definitely recommend this product.

This version of Mr. Coffee makes tea just fine. LOVE the size and design of the pitcher, yet the top blue lid of the brewing unit literally pours condensation onto your countertop after brewing. I was shocked, honestly. After you're done brewing, the next step is to dispose of your tea bags. The only way to do this is to open the blue flap on the top to remove the tea bag container/filter. Rather than running into the reservoir, the condensation pours (no joke here) down the back side of the brewing unit and onto your countertop. Not to mention the water you now need to clean up, it's also running all around the area where the power cord attaches to the unit and is plugged into the outlet. I seriously have to wonder if anyone actually tested this design? How could they have tested the designed and allow it to go into production? Boggles my Engineer-Want-To-Be mind. I had a much older version of the Mr. Coffee Tea Maker which had a problem with the pitcher leaking - I FINALLY decided to upgrade, only to have another water/mess problem. Honestly, I sometimes wonder why I don't just brew my tea in a pot on the stove, just like mom taught me.

I've had the Bodum Chambord and Brazil french presses before, and I like this one much better. Not having to worry about breaking the glass is kinda huge, and actually opens up other use cases you'd otherwise probably not reach for the super fragile thingy your caffeination depends on that tends to slips right out of your meaty man hands. The press screens are better on this one, and the reinforcing metal is sturdier. It all flexes less, which means fewer coffee grounds get stuck in-between the layers. The press also unscrews easily for cleaning, and is thought out well enough that there are no nuts or bolts to lose down the drain. The insulated aspect of this french press works well. The lid is a vacuum chamber as well. It has a bevel cut into it to make pouring easier, but I've found that it stays warmer quite a bit longer if the bevel isn't oriented toward the spout. It still pours okay, regardless. The only thing I don't like about this is the paint is coming off. I wish I would have gotten the unpainted version. I went the painted route because I thought the silver one would show finger prints and smudges easily. But based on how the lid is, I don't think that'd actually be a problem. Go silver, and don't look back.

Update March 29.2023: I was able to contact the seller directly and had immediate response. They are sending out a new lid! I did have to complete a form and include model#, model date (located on the bottom of unit), original receipt, purchased from and include photos. I am extremely impressed with how this was handled and response time. Customer service was spot on! I would definitely recommend this unit. March 29.2023: I purchased this as a house warming gift. Great simple coffee maker with a hot pot of fresh brew within 7mins! Simple minimal design with a couple flaws. 1) make sure to pour over the sink this does leak. 2) the lid push lever broke after 6 months. Would I recommend this product...Yes, several reasons. It makes a fresh brew (no bitters) within 7mins. I have read comments regarding flavor of coffee I suspect they are not using fresh (whole bean) grind at home. I like the carafe. I like the simple design with one push button on/off design. This all being said after the hefty price tag I feel the lid design and leaky pour should definitely NOT be happening. I have had other pricey models with heated reservoir and 6 minute drip. The Bonavita makes a perfect cuppa in 7mins and without a bitter taste, this model fits under the cabinet. Good looking sleek design, and great customer service.

I love everything about it

This machine will brew acceptable coffee from a Keurig pod once it warms up but the first few cups come out decidedly not hot, and weak. Unless preheated by brewing several large cups it does not brew acceptable espresso. That's because it barely reaches a temperature of 155F (measured with a calibrated thermometer, 3 times) for the smaller cup sizes. Even for full size cups after a lot of warm-up it is in the low 170s at most. The specs claim it brews at 190F and the company's responses in the question/answer here claim it brews between 88C and 93C - 195F and 199F -- but this is not true, as I measured and as you can see from other negative reviews here. Other problems: 1) The espresso sizes are way too large. You can't get a proper single espresso (never mind a ristretto) from this machine -- the smallest size is marked as 2oz and makes a fair bit more than that -- and what idiot would actually try to make 6oz of coffee from a single Nespresso capsule? That's just a recipe for an intolerably bitter Americano (which should be made with 3oz of espresso plus hot water). They should have calibrated the machine to 1oz / 2oz / 4oz (maybe) but definitely not 2oz / 4oz / 6oz. 2) As some other reviewers have mentioned it drips for a long time after brewing so you can't really grab-and-go without filling up the drip tray pretty fast.

The electric part stopped working all together. Opened her up and on the circuit board a wire was not soldered at all. It’s an easy fix if you tinker on things. But shouldn’t have happened to start with. Bottom line I still love this coffee pot, just wish it was put together with more care.

Calidad precio es excelente, es de material resistente. Lo usamos todos los días, es fácil de lavar y de usar.

The capsule that fits are the Nespresso ORIGINAL LINE. That is the key. I use this everyday and it does a great job with the capsule in my opinion. I have used Nespresso and Starbucks brands of the OriginalLine capsule. This also has an interchangeable portafilter cup for ground coffee. I have been using that much more since getting a conical burr grinder.

This is perfect for a single cup of coffee. I’m the only coffee drinker in our house and so don’t always want to make an entire pot of coffee, and this serves the purpose perfectly. It has a nice stainless finish, the insulation keeps the coffee warm as it’s brewing, and the plunger is a perfect fit so it doesn’t let any of the granules through. It’s also very easy to clean, I clean mine in a dishwasher. All in all a great buy and good value for money.

Love this coffee maker more than I expected to. The reason I chose this is because it is an excellent value over a traditional latte machine. I enjoy hot and cold coffee and I’m not big on espresso. If you like lattes for the foam/milk aspect like me, not the espresso aspect— this is for you. The coffee is still very bold depending on what you choose and how much you use, so it is giving my previous Starbucks order a run for its money. Get some torani syrups and expect a bit of a learning curve!

I bought this less then 2 weeks ago for a gift for my daughter. Very disappointed. The Mickey Mouse on the front coming off already. Just from wiping it to clean. No soap or anything like that. A soft rag with water on it. It runs slow almost like it's clogged up. Not sure if we just got a bad one but I would not recommend